Steel Industry
Electrical Arc furnace, Ladle furnace (Graphite Electrodes), Induction Furnace (Coil), Concast Casting/Black Refractory
Reduction in Carbon consumption/electrical consumption per ton of steel produced is achieved by new Generation coating by reducing Oxidation and Erosion of Graphite Electrodes. Apply Thermocoat (SEC-L) and Thermoplast Grade 1800 coatings.
Aluminium Industry
Carbon Anode and Cathode, M.S. Stud Anode.
Reduction in carbon consumption, Electrical consumption per ton of Aluminium produced is achieved by new Generation coating by reducing Oxidation and Erosion of Carbon Anode. Apply Thermoplast Grade 1800 / Thermocoat (SEC-L)
Graphite Electrode Manufacturing Industry
Power feeding electrodes and cross bar, pusher electrode, electrtodes under Graphtisation process, center and side RCC block.
Application of Thermoplast Grade 1800 coating reduces Power consumption by preventing Oxidation and Heat loss due to radiation from the surface of electrode.
Heat Transfer Equipment Manufacturing Industry
Heat exchangers, condensers, radiators etc.
New Generation coating protects heat transfer surface from corrosion, effect of saline atmosphere of coastal area/power generation plant/petrochemical industries - (SO2/SO3/CL2 gases). Apply "METSOL".
Graphite specialties Equipments
* Condenser Tube
* Hydrochloric (HCL) gas burner(W.T.-2750)
* Degasification pipe in Aluminium smelter
* Graphites stirrer/shaft/impeller and graphite tubes
Apply Thermoplast Grade 1800
All above specified application of coating material is continuously under use in respective industries for cost effective production and to maintain consistency in quality since last 4 yrs. All the above coatings are well established, time tested and regularly used in above industries. |
Quick Search 
